Using hot glue

norcalfrank

So I haven't been using hot glue for gluing PVC to parts, but I'm getting ready to give it try. Do you guys just put some hot glue on the end of the pipe and stick it to the item, or do you put the pipe to the piece and run a "bead" around it? What is the best way to get the PVC pipe off the part after you are done with it? Thanks guys...

IceMaster

I just apply the hot glue to the pipe and then stick it to whatever. After you're done, it usually pulls off quite easy and then you clean the leftover hot glue off the item. Some times, like if I'm doing multiple light switch covers, I have a piece of plexiglass that will hold about 6 plates, and I use two way tape to attach those instead of hot glue

K2Concepts

What he said...and if some sticks to the part? Just spray some isopropyl alcohol on it and the glue will come right off...

norcalfrank

Cool guys. Thanks for the info.

dippinchit

regular hot glue sticks are fine for some things. When you want a stronger bond for heavy parts, try the color coded glue sticks that are sold by PDR. Paintless Dent Repair.
You can mix colors to get a strength you need. Colors are for telling you what strength you have.
Comes off really well with Iso Alcohol
The PULL tabs are also useful Vise grips on tab make an easy handle.
I like that they are cheap and LONG. Less reloading.