Aqualac question

ImmortalImmortal Posts: 261Member ✭✭✭
i have been using some aqualac lately and having some issues. I am using a cheap spray gun with 1.5 tip and have tried the 1.4 tip also. I get my gun dialed in and it starts off spraying beautifully then after a bit it starts throwing chunks of paint onto the part and the gun plugs up. Is it my cheap gun or something else?

I plan to buy a decent gun for base coat next so recommendations are welcome I will be using mostly aqualac and ohw through it. 

Comments

  • OverCoatsOverCoats Posts: 353Member ✭✭✭
    are you straining your paint? try that and should solve your problem
  • MidOhioHydrographicsMidOhioHydrographics Posts: 9,430Member, Moderator, Business Ninja El Moderator
    Yeah sounds like you have chunks in your paint already if it's plugging your gun. After a while of spraying I always get some buildup on the nozzle of my gun w Aqualac. But it will wipe away.
  • jtagliajtaglia Posts: 2,295Member ✭✭✭✭✭
    Once you've done all of that make sure your compressor isn't throwing stuff into your lines. Put a line filter & a filter at your gun.
  • Archer0545Archer0545 Posts: 806Member ✭✭✭
    Agreed, probably need to strain your paint. Buy a bunch of the mesh paint filters from TCP global.
Sign In or Register to comment.