MKralMKral Posts: 83Member ✭✭
Just did a cup in Kansas Hydro true flame.  Turned out good but want advice on clear coat.  I want to kandy it.  Yellow or orange?  Any suggestions?
Also did one in Red Boa and want to tint it as well.
any suggestions would be appreciated!!


  • smedlinsmedlin Posts: 2,051Member, Business Ninja ✭✭✭✭✭
    You will probably get more responses if you show a pic of your cups.

    (and not everything looks good with a bit of candy on it)
  • WileECoyoteWileECoyote Posts: 6,839Member, Moderator, Business Ninja El Moderator
    I am guessing candy is just going to make those full color prints just wash out. Typically candy gets applied to single color prints. You are welcome to try... But I wouldn't advise it.
  • MKralMKral Posts: 83Member ✭✭
    edited April 2018
    Thanks guys that is why I asked. I appreciate and respect your opinions and will go straight clear. Thanks again.
    These are for a friend of mine that made my tanks for me and has done a lot for my family and I wanted them to be the best I could make them. The hits were good, no touch up at all needed so I will do a simple straight clear on them.
  • MKralMKral Posts: 83Member ✭✭
    edited April 2018
    FYI the picture of the cups are with no clear on them.
  • DeviousDipsDeviousDips Posts: 1,836Member ✭✭✭✭✭
    Those look great
  • MKralMKral Posts: 83Member ✭✭
    Thank you!! I appreciate it.
  • K2ConceptsK2Concepts Posts: 13,694Administrator El Jefe
    Yea I would leave them alone...
  • MKralMKral Posts: 83Member ✭✭
    Thanks guys. I just hit them with some OHW clear and just a bit of blue pearl. Looks pretty good. Pearl is hard to see inside but pops in the sun.
  • abrantabrant Posts: 29Member
    those look pretty slick. nice job
  • MKralMKral Posts: 83Member ✭✭
    Thank you @abrant
  • LibertymanLibertyman Posts: 967Member, Business Ninja ✭✭✭✭
    Nice, I wouldn't candy them, straight clear
Sign In or Register to comment.