Time saver

SpinnerSpinner Posts: 167Member ✭✭✭
Rinsing parts takes longer than dipping parts... at least it did before I built this little rinse station! Just cut off 3-5 minutes per part.

Space is tight in this shop, but this Rubbermaid trough fit in just right.


  • SpinnerSpinner Posts: 167Member ✭✭✭
    I ended up using 2 of these troughs. Water was splashing out over the top, so I cut the top off second one to raise the sides. The pump is a 1/3 hp sump pump from the home center. We'll see how long it lasts... should be forever with the little amount of time this is in use.
Sign In or Register to comment.